What do you think?
Rate this book
Understanding Wood Finishing
Now it's easier than ever for woodworkers to get a perfect finish on every project! This book dispels the myths about wood finishing and explains exactly how and why every finish behaves the way it does.
320 pages, Paperback
First published December 1, 1998
4 people are currently reading
69 people want to read
Ratings & Reviews
Friends & Following
Create a free account to discover what your friends think of this book!
Community Reviews
Displaying 1 - 5 of 5 reviews
August 22, 2016
I'm very impressed, so much so that I ordered another copy to give to a friend. (It was $3.47 used delivered via AbeBooks.) He & I were discussing some of the points this book makes last week.
I noticed some common issues that Flexner addresses immediately.
- Using old sandpaper. It's not gold & wears out. Trash it, get a new piece.
- Flexner tears a sheet into thirds, then folds each into thirds for hand sanding, although he recommends a sanding block when possible. I do the same, although I quarter the sheets to start.
- Skipping grits. When hand sanding, it's important to clean well in between grits & sand with each grit. Jumping from 80 to 150 costs time.
- Sanding with too fine grits. Flexner says he rarely goes beyond 220, not even that with some woods & finishes because it's just not noticeable. It can even mess up how the wood takes stain.
Then he gets into the best explanation of types & uses of scrapers that I've ever read. Wow! I didn't know anyone else used them any more. I picked up a couple of great sharpening tips from him, too.
I've learned each of these points the hard way, so to see Flexner make all of them so quickly in his book gave me a lot of confidence in it.
The section on stains & finishes is thorough, but it's confusing as hell the first time through just reading. Much better when I went back with a specific question about trying for a specific effect or attributes of a finish. There are excellent color pictures on achievable effects & great info on durability.
The rest of the book is good on specifics of finishing, but beyond what I want to do for the most part. I might look at chapters for specific projects or to dress up an otherwise bland design. Great color plates & explanations in a couple of sections. Very good final chapter on refinishing.
Definitely a keeper & one that anyone who finishes wood on a regular basis should read from cover to cover, even if they're minimalists like me. I learned a lot of what he teaches just by trial & error over decades of doing it myself. In the end, I'm more of a polyurethane guy. I like the look of natural wood & it's one of the best all around finishes. Still, I added some new tricks.
I noticed some common issues that Flexner addresses immediately.
- Using old sandpaper. It's not gold & wears out. Trash it, get a new piece.
- Flexner tears a sheet into thirds, then folds each into thirds for hand sanding, although he recommends a sanding block when possible. I do the same, although I quarter the sheets to start.
- Skipping grits. When hand sanding, it's important to clean well in between grits & sand with each grit. Jumping from 80 to 150 costs time.
- Sanding with too fine grits. Flexner says he rarely goes beyond 220, not even that with some woods & finishes because it's just not noticeable. It can even mess up how the wood takes stain.
Then he gets into the best explanation of types & uses of scrapers that I've ever read. Wow! I didn't know anyone else used them any more. I picked up a couple of great sharpening tips from him, too.
I've learned each of these points the hard way, so to see Flexner make all of them so quickly in his book gave me a lot of confidence in it.
The section on stains & finishes is thorough, but it's confusing as hell the first time through just reading. Much better when I went back with a specific question about trying for a specific effect or attributes of a finish. There are excellent color pictures on achievable effects & great info on durability.
The rest of the book is good on specifics of finishing, but beyond what I want to do for the most part. I might look at chapters for specific projects or to dress up an otherwise bland design. Great color plates & explanations in a couple of sections. Very good final chapter on refinishing.
Definitely a keeper & one that anyone who finishes wood on a regular basis should read from cover to cover, even if they're minimalists like me. I learned a lot of what he teaches just by trial & error over decades of doing it myself. In the end, I'm more of a polyurethane guy. I like the look of natural wood & it's one of the best all around finishes. Still, I added some new tricks.
February 10, 2019
I am a novice woodworker. I am in need of some tips on how to properly finish my projects. This book is just the ticket.
I liked the detailed history and mechanics of how the process works. There is a lot to take into consideration, so I will be adding this to my library so I can read and reread portions as I take on my projects. This is a excellent reference book.
Have a GoodReads.
I liked the detailed history and mechanics of how the process works. There is a lot to take into consideration, so I will be adding this to my library so I can read and reread portions as I take on my projects. This is a excellent reference book.
Have a GoodReads.
November 28, 2014
This is the best book I've read on wood finishing. The author goes into the chemistry behind all of the most common finishes without getting two deep into chemical theory. I feel much more confident in my ability to predict the outcome of applying a finish without having to consult "magic" finishing recipes.
October 8, 2015
This is a great book on wood finishing, the only downside is its age, Flexner has written more updated versions. One the other hand it's so inexpensive on the used book market you can't go wrong buying a copy.
January 19, 2014
A great book for beginners and even for those with some experience. It's amazing how much chemistry is involved in wood finishing.
Displaying 1 - 5 of 5 reviews