What do you think?
Rate this book
Patternmaking for Underwear Design
Patternmaking for Underwear Design is a comprehensive patternmaking guide suitable for students, teachers and the industry. Step-by-step instruction is matched with superb illustrations, and all measurements are provided in both metric and Imperial scales. This book introduces common bra patternmaking methods widely used in the industry and offers the authors own innovative bra patternmaking method entitled Shin’s method. This new method includes two intermediate blocks developed using the flat patternmaking concept. Shin’s method enables novice patternmakers to create various bra designs from scratch with commercial fit quality.
316 pages, Paperback
First published April 1, 2010
9 people are currently reading
297 people want to read
Ratings & Reviews
Friends & Following
Create a free account to discover what your friends think of this book!
Community Reviews
Displaying 1 of 1 review
June 8, 2019
As I am drafting the first bra (while writing this review) - 3.1 The basic underwired bra pattern, I just discovered the C.F to B is incorrect.
It says Step One: C.F. to B = Half of the sternum + wire width + 3/4" + 1". Figure 1 shows C.F. to B equals 5 5/16" - 6 5/16, (if the sternum width is what this refers to the sternum width is listed as 5/8"-3/4" on page 8, which would be incorrect math).
So, I used the half the across front (A.F.) measurement of 12 for the 34B (size 10, full bust girth 34), (assuming this must be the correct measurement to use); but it is still incorrect, (12 /2+ 3/8 + 3/4" + 1 = 8.075; Which is not Figure 1 calculations). The editor's/publisher doesn't have a correction listed for this. So, I'm not sure what measurement is being used. Accuracy is a must in pattern drafting. This is aggravating!!!! I'll post an update when I complete the draft.
It says Step One: C.F. to B = Half of the sternum + wire width + 3/4" + 1". Figure 1 shows C.F. to B equals 5 5/16" - 6 5/16, (if the sternum width is what this refers to the sternum width is listed as 5/8"-3/4" on page 8, which would be incorrect math).
So, I used the half the across front (A.F.) measurement of 12 for the 34B (size 10, full bust girth 34), (assuming this must be the correct measurement to use); but it is still incorrect, (12 /2+ 3/8 + 3/4" + 1 = 8.075; Which is not Figure 1 calculations). The editor's/publisher doesn't have a correction listed for this. So, I'm not sure what measurement is being used. Accuracy is a must in pattern drafting. This is aggravating!!!! I'll post an update when I complete the draft.
Displaying 1 of 1 review