Lahandi Baskoro's Blog

DZL series of horizontal biomass fuel steam boiler adopts a new type of water and fire tube combined structure with a single barrel longitudinal. The boiler flue gas three return design, independent air chamber, whole or assembled type, compact structure, short installation cycle. Biomass particles steam boilers covers a small area, fast heating and pressure increase, simple operation, convenient maintenance, high thermal efficiency. The convection tube bundle adopts the threaded smoke tube, which makes the flue gas spiral rotation, high heat transfer efficiency, and improve the independent thermal efficiency and gas production. The water capacity of the boiler is large and insensitive to the fluctuation of the load, so it is suitable for users with a wide range of load adjustment. Combustible biomass pellets, distiller’s grains, rice chaff, wood chips, straw and other fuels.

 

Biomass particles steam boilers

 

Biomass fired steam boiler set before and after the arch tube plate to improve the flexibility of the tube plate, so as to reduce the thermal stress of the weld end of the tube, prevent the tube plate cracking. Equipped with large volume furnace and wing flue, effectively reduce the local high temperature at the bottom of the drum, prevent bulging. This series of steam boiler can effectively reduce the smoke emission concentration and smoke exhaust temperature, higher front arch and lower back arch, rapid ignition, large combustion area, ash burning rate is high, improve the boiler thermal efficiency.

Biomass fired boiler with high quality heat transfer components, the use of screw smoke pipe self-cleaning ability is strong, in half load when the screw smoke pipe gas flow rate can still be above 8m/s. This series of boiler products can produce self-ash removal capacity above this flow rate (rotating high-speed airflow will be less than half load ash collection swept away), this kind of ash collection phenomenon, so that this type of boiler in the perennial operation of the output unchanged, the efficiency unchanged. The heat transfer element of biomass particles steam boilers is optimized, and the flow resistance is suitable, no dust accumulation, small wear, high strength and fatigue resistance.

The boiler series includes three sections of front, middle and back air chamber, chain or reciprocating grate, combined arch formed by front supply and back. At the bottom of the pot room arrangement in the wind and the wind chamber and achieve segmented with the wind, before and after the period of the wind room decorate a grate, above the furnace front before installing upward sloping arch tunnel, after the furnace after installation tilt of the arch, this combination of biomass fuel boiler and combustion characteristic, make to adapt biomass species widely, boiler burning degree good, the effect of pollution discharge bottom.

 

Biomass fired steam boiler

 

Biomass particles steam boilers is widely used in a variety of industrial industries, such as textile, chemical, paper, machinery, food, agricultural products processing industry, etc. The new type of high quality heat insulation material, light weight, less heat loss, superior heat preservation performance. Zozen Boilers specializes in producing various types of boiler products, and has established friendly and cooperative relations with customers in more than 100 countries and regions. Boiler product quality, stable operation, welcome to consult!

The post Biomass Particles Steam Boilers Supplier appeared first on Industry Boiler Manufacturer.

Gas steam boiler can be mainly used in petrochemical, textile, rubber, locomotive and industrial and mining enterprises and other industries. This series of steam boiler adopts the structure of wet back, wave furnace, and the heating surface is symmetrical. Effectively reduce the thermal stress of the boiler, and improve the safety and life of the boiler. The heat transfer effect of threaded pipe is improved by adopting high efficiency heat transfer pipe. At the same time, it has good thermal expansion and cold contraction performance, and can prevent the deformation of the heating surface. Gas fired steam boilers adopts low layout of the combustion chamber, so that the safety range of the boiler water level is larger, the boiler steam space is larger, and the steam quality is well guaranteed.

 

Gas fired steam boilers

 

The tail of the boiler is arranged with steel tube fin-type energy economizer, which has high heat transfer efficiency. The back row smoke temperature of the energy economizer is less than 150℃, so as to reduce fuel consumption. The boiler adopts high quality aluminum silicate to encrypt heat preservation to reduce heat dissipation loss. The boiler heating surface arrangement is sufficient, the boiler starts fast, the load rise time is short. Maintenance door hole, convenient maintenance. Adopt the whole quick installation type structure, the boiler structure is compact, covers an area of small, the installation is quick. WNS series gas boilers adopt well-known brand burners to realize efficient combustion of boilers, save fuel, reduce pollution, noise and waste gas emissions.

Gas fired steam boilers adopts advanced mechanical and electrical integration automatic control technology. Remote human-computer interaction and data sharing can be realized through mobile Internet. The use of integrated low nitrogen (NOx) control technology, including flue gas recirculation (FGR), to achieve high combustion efficiency, low pollutant emissions, to ensure that NOx emissions in line with the use of environmental protection boiler emissions requirements.

The main engine of WNS series steam boiler is an integral structure, and the burner is assembled on the cover of the front smoke box. The body is mainly arranged with heating surface and combustion chamber. With reasonable structure, compact, low steel consumption, furnace with offset waveform furnace, thermal insulation layer choose new lightweight heat insulation material, outer packing use color sheet, appearance packaging for cuboid, the boiler performance, weight, structure size and appearance modelling and compared with capacity of the product has obvious advancement and the look and feel.

The whole structure of this series of gas fired boilers is reasonable, compact, belongs to boiler island type, in line with the conditions of quick assembly and delivery. This product is composed of three parts when leaving the factory; The main boiler, chimney and piping system, in which the main engine and the chimney part have been manufactured in the factory, and the pipeline valves and instruments supporting the main engine have been installed randomly, and then transported to the site for assembly of the main engine and the chimney. The air source, power supply and water pipeline can be connected on site for the test run. Greatly shorten the installation cycle, and can ensure product quality.

 

WNS series steam boiler

 

Gas fired steam boilers water cycle is simple, the structure of the pressure parts is reasonable, and under the condition of ensuring the water quality, it can operate safely. The fuel from the outside gas source into the burner through automatic regulation, automatic ignition function to produce high temperature flame, from the front of the furnace into the combustion chamber, the upper side of the combustion chamber into the convection heating surface, through the upper part of the former smoke box into the second convection heating surface from the rear of the smoke box away from the boiler to the chimney into the atmosphere. Welcome users to our factory for consultation and procurement, Zozen Boilers will serve you wholeheartedly!

 

The post Gas Fired Steam Boiler Manufactured appeared first on Industry Boiler Manufacturer.

SZS type steam boiler adopts the internationally popular boiler shell type three return, all wet back structure. Large volume design of combustion chamber, combustion is more sufficient. The boiler has the advantages of compact structure, small occupation area and good flame fullness. This is the reason why oil-fired steam boiler is popular among enterprises, and it is also one of the advantages of oil-fired steam boiler.

The oil-fired steam boiler furnace adopts the membrane water-cooled wall structure, and the boiler adopts the air-tight inner protective plate of the fully closed welding structure as a whole, and the furnace wall has good sealing performance. Less smoke loss, high thermal efficiency; The furnace volume is large, the radiation heating surface is sufficient, the fuel combustion is completely full, the environmental protection performance is good; Boiler output is sufficient, with overload capacity; Using high thermal resistance material as insulation layer, thermal insulation performance is good.

 

SZS type steam boiler

 

The price of 10 tons of SZS type steam boiler is not invariable. It can be completely according to the needs of customers, the quality of auxiliary machines and main machines of the boiler will be different, and the price is also different. It is widely used in industrial production because of its advantages of energy saving and environmental protection, simple operation and durability.

The price of this series of steam boilers consists of two parts, one part is the boiler body, and the other part is the auxiliary boiler. Under normal circumstances, as long as the parameters are determined, the price of the boiler itself is also determined. However, the auxiliary machine is different. Different brands of auxiliary machines have different prices. The boiler product adopts double-drum D-type layout, compact structure, and greatly reduces the area of the boiler. In addition, it adopts a membrane water wall structure, which greatly improves the sealing performance of the boiler.

The pipeline within the scope of the boiler only includes valves and pipelines from the flange of the return water check valve to the flange of the boiler body such as the outlet valve and the sewage valve. Accessories include valves and watches used in the boiler body. Such as pressure gauges, air valves, spring safety valves, outlet and return valves, check valves, thermometers, etc. The components are insulated with light-weight thermal insulation materials, and the main thermal insulation materials are aluminum silicate fiberboard and rock wool. The outer guard plate is colored corrugated steel plate. The connecting flue between the components of the boiler is connected with the components by welding, and an expansion joint is arranged in the middle to ensure the free expansion of the flue.

 

Oil-fired steam boiler

 

SZS type steam boiler burns with slight positive pressure to prevent air leakage, compact design of convection heating surface, and low smoke and wind resistance. Its combustion system is well matched with the safe water circulation design. The unique design of the superheater built into the convection zone ensures safe and reliable operation. Modular design, automatic intelligent control. Zozen Boilers specializes in producing various types of boiler products. The quotation of SZS series boilers is not static. According to the configuration of auxiliary equipment and the quality of the main engine, the price will fluctuate. Users can choose the price and equipment they are satisfied with. When buying boiler equipment, you should avoid the temptation of price. When choosing the lowest price products, you should choose manufacturers and equipment with higher cost performance.

The post 10 Ton SZS Type Steam Boiler Price appeared first on Industry Boiler Manufacturer.

SZS series boiler adopts D type arrangement, natural circulation, double tube tube boiler, tube longitudinal arrangement, membrane type water wall structure, micro positive pressure combustion. Steam boiler for sale, the furnace is covered by the membrane wall, and the flue gas enters the convection tube bundle connected between the upper and lower drum from the furnace outlet. After the flue gas flows through the convection tube bundle, it enters the rear heating surface — ND steel spiral fin energy saver and condenser, and then enters the chimney through the flue to the atmosphere.

 

Steam boiler for sale

 

This series of steam boiler adopts the whole membrane wall structure, the body does not leak air, exhaust heat loss is small, high thermal efficiency. Its compact structure, small installation volume, save investment. Steam boiler uses natural circulation and the use of large section ratio, water circulation is safe and reliable. Equipped with efficient brand burners and auxiliary machines, accessories, to achieve automatic operation. Boiler feed water pump adopts continuous electric regulation, and has high and low water level alarm chain protection function. The furnace is equipped with an inspection hole, which provides great convenience for use and maintenance. The top of the furnace is equipped with an explosion-proof door.

Steam boiler for sale using large furnace technology, high heat exchange efficiency. Effectively increase the unit radiation heating area, reduce NOx emissions. The thermal efficiency is over 98%, and the exhaust temperature is below 75°. The anti-corrosion and scale measures adopted ensure that the furnace body will not corrode and prolong the service life. Exterior integrated fin tube energy saving device, independent condenser compact structure, easy maintenance. Convenient switch of front and rear smoke box door, flexible disassembly, convenient boiler maintenance and maintenance.

SZS series steam boiler adopts imported burner, combustion, noise, exhaust gas emission is extremely low. Adopt frequency conversion water supply and control technology to ensure condensation rate of steam in flue gas. With a unique pulse water level detection circuit structure, reliable performance. At the same time, the programmable logic controller (PLC) is combined with touch screen and equipped with buttons to realize manual and automatic dual-channel intelligent control. Adequate reserved ports and build-like expansion modules can realize group control, remote monitoring and building monitoring, and reduce repeated investment for the development of special needs of users.

 

SZS series steam boiler

 

Steam boiler for sale, the overall use of centrifugal glass wool multilayer insulation, less heat loss. Adopt cold steel plate to pull edge, inlay type outsourcing, overall spitting, compact and beautiful appearance. With multiple boilers connected to the network, without setting the main console can automatically select the number of boilers running and distribute the load of each boiler. Zozen Boilers specialize in producing various types of boiler products, all year round boiler production, welcome customers to come to consult!

The post SZS Type Steam Boiler For Sale appeared first on Industry Boiler Manufacturer.

Because of its reasonable structure design and excellent performance, the development prospect of oil – fired water tube boiler is very good. Water tube boiler price set reasonable, boiler can meet the demand of different evaporation.” D “type boiler, reasonable design, mainly by the upper drum, lower drum, header, water wall, convection tube bundle, furnace and burner and other parts. Therefore, in addition to the furnace and burner, other components are subjected to the saturation pressure of the boiler.

 

Water tube boiler price

 

The furnace of this series boiler is mainly a place for fuel atomization and combustion. Its role is to provide enough space so that its fuel can be fully burned. At the same time, the heat from the combustion is not lost to the outside of the boiler. Furnace is composed of refractory brick wall and water-cooled wall. The water-cooled wall can absorb the radiant heat of high temperature flame and flue gas, so it can be white firebrick, which has the function of cooling furnace wall. At the same time, it can also improve the evaporation rate of the boiler.

Water tube boiler price is competitive, after fuel atomization combustion, high temperature flame and flue gas and furnace water wall, heating surface and slag tube for strong radiation heat exchange. The flue gas is then directed to the convective heat transfer flue. Before entering the superheater, the fumes need to pass through three rows of slag traps to properly cool down. The superheater can be protected from the direct irradiation of the high temperature flame in the furnace. This series of boiler products in the body heating surface layout, can be very convenient to increase or decrease the size and quantity, easy to form different evaporation capacity of the boiler.

Because this series of products have mastered the application technology of water wall, for the boiler with different evaporation capacity, under the condition of different furnace volume heat load, the heating area of water wall can be increased or decreased to control the flue gas temperature at the outlet of the furnace. So that the furnace has a certain temperature level. Both can ensure good combustion, and can protect the furnace wall. And at the exit of the furnace, there will be no bad phenomena such as coking and corrosion of convection tube bundle caused by the use of inferior fuel.

Each boiler will have a critical load given the steam pressure, drum size and salt content of the boiler water. When the load is less than the critical load, the amount of water in the steam belt will increase slightly with the increase of the load. When the load exceeds the critical load, the amount of water in the steam belt increases sharply. When the evaporation of the boiler increases, if the volume of the boiler is reduced, the furnace volume heat load must be appropriately increased to reduce the volume and weight of the boiler per unit evaporation.

 

Oil fired steam boiler

 

Water tube boiler price is reasonable, boiler internal are bent water pipe, tube cross section is smaller than the tube outside, water flow rate greatly increased. At the same time, it also has extremely fast water flow rate and excellent water circulation system, high evaporation efficiency, strong performance to adapt to load changes, more suitable for high working pressure environment, boiler heat absorption rate and high thermal efficiency. Zozen Boilers specialize in producing all kinds of high quality boiler products and boiler services to customers, welcome to consult and purchase.

The post Water Tube Boiler Price in Nepal appeared first on Industry Boiler Manufacturer.

The gas-fired boiler is composed of boiler body and auxiliary machine. The gas fired steam boilers is boiler body is the main engine of the boiler, and the auxiliary equipment is relatively more. Such as gas burner, computer control cabinet, cylinder, valve instrument, chimney, water treatment, softening water tank and so on.

Gas steam boiler combustion raw material for natural gas, in the combustion of no harmful gas emissions on air pollution is relatively small, is a clean fuel, more in line with environmental standards. In order to reduce the pollution of the atmosphere, the steam boiler adopts a low nitrogen burner for combustion, and the pollutant emission of the boiler is less than 30mg/m3. The use of low nitrogen burner is not only small emissions but also can burn fuel more fully, greatly reducing the operation cost of the boiler.

 

Gas fired steam boilers

 

In order to improve automatic safety protection measures, each gas-fired boiler is equipped with an intelligent controller. The gas fired steam boilers adopts multiple safety protection system, which can ensure the safety of equipment and personnel when abnormal situations occur in the boiler. This series of boiler products adopt suitable size of furnace, open flame, wide capacity radiant heating surface, suitable for all kinds of oil and gas burners, simple structure. Perfect strength design, abundant traditional area, so that the boiler performance is fully guaranteed.

Industrial gas boiler can choose high quality pumps, valves, electrical components and safety accessories, complete. Boiler has automatic ignition, program control, water level control, temperature control, overpressure protection, furnace flameout protection and other control and protection functions, simple operation, safe and reliable, convenient maintenance. Before leaving the factory, each boiler is strictly packaged, including the debugging of burner and point control device. After confirmation, the supervision and inspection certificate is issued by the technical supervision department.

It burns enough fuel during operation, runs stably and takes up less space. At the same time, a spoiler is inserted into the smoke tube to slow down the smoke exhaust speed and increase the heat transfer. The boiler has high thermal efficiency and reduces the user’s cost. Before the heat treatment operation of the gas steam boiler, the change of the heat treatment data shown by the automatic recording curve should be observed at any time, and the boiler should be adjusted in time to ensure that it meets the specified requirements. And carefully fill in the heat treatment operation record, at the same time have the temperature – time relationship curve of automatic record.

 

Industrial gas steam boiler

 

Gas fired steam boilers is a new type of energy saving and environmental protection boiler, reliable quality, high thermal efficiency. Zozen Boilers is a high-tech boiler enterprise integrating R & D, production, sales and service. After years of development, we have successively developed various types of boiler products. Engineering and technical personnel to further improve the boiler operation to achieve the degree of automation, welcome to come to my factory procurement consultation!

The post Industrial Gas Fired Steam Boilers appeared first on Industry Boiler Manufacturer.

The gas-fired hot water boiler adopts the structure of wet back and wave furnace, and the heating surface is arranged symmetrically. So that the force and expansion of the boiler are more reasonable. Reasonable heating surface layout ensures good water circulation and heat exchange. So that the heat transfer effect reaches the best state. And improves the boiler thermal efficiency. The hot water boiler price is reasonable, and the wet back structure of the whole butt weld. The adopted to avoid the damage of the back wall by high temperature flue gas. The ensure the reliable operation of the boiler. The combustor adopts the wavy furnace. Which effectively reduces the thermal stress of the boiler and improves the safety and service life of the boiler.

 

Hot water boiler price

 

The main structure of this series gas fired boiler is composed of boiler shell, furnace bladder, steering chamber, pipe and so on. The boiler is suitable for natural gas, liquefied gas, city gas and other fuels. It is a horizontal three return fire tube boiler. Selection of high quality burner and advanced automatic control system. Make the boiler combustion more stable, more convenient operation, more safe and reliable operation; The installation time of the boiler is short. And it can be put into operation when the instrument valve, water source, power supply, fuel pipeline and discharge pipeline are connected on the site.

All WNS type hot water boilers are equipped with a water conducting unit under the backwater casing. Backwater here through a certain speed to produce a kind of ejection action. So that the hot boiler effluent and cold backwater to mix. Heat flow technology makes boiler return water temperature is not limited, not easy to form condensate. Improve the service life and thermal conductivity of the boiler.

The hot water boiler price is reasonable, and the heating surface of the boiler is adequately arranged. The structure of large space furnace is conducive to the full combustion of fuel and the reasonable setting of smoke airflow velocity. Which ensures the full heat transfer of the boiler. At the same time, the series of hot water boilers are equipped with threaded pipe, so that the flue gas flow state in this area is turbulent. The heat transfer coefficient is greatly improved, and the heat transfer efficiency of the boiler is enhanced. At the same time, the reasonable design of the front cigarette box door is convenient to open. So that the cigarette tube ash cleaning is very simple.

The flue gas waste heat recovery device (energy saver) is added at the end of the series boiler products. To reduce the exhaust temperature and heat loss. The use of high quality automatic burner, NOx emissions control in a very low level range. Abundant heating surface layout of the furnace body ensures. The high temperature flue gas and water heat exchange with high efficiency. And effectively controls the heat pollution discharged from the boiler.

 

Gas-fired hot water boiler

 

The hot water boiler price is competitive, the main structure of the boiler is through large furnace and chamber combustion, and the combustion is more sufficient. The emission concentration of harmful components in the flue gas is further reduced. And the technical indicators such as the blackness of flue gas. The concentration of limited emissions and the blackness of smoke dust meet the environmental protection requirements. The structure of the large furnace is matched with the burner. Which prevents the scour of the flame to the furnace and increases the service life of the furnace. Zozen Boilers specialize in producing boiler products. Which have long service life and safe operation. Can make WNS hot water boiler run very reliably and safely through optimized combustion chamber layout and water circulation system. Welcome to consult procurement!

The post Gas Fired Hot Water Boiler Price in Sri Lanka appeared first on Industry Boiler Manufacturer.

The gas steam boiler price is not uniform. The setting of the price should be based on the specific parameters of the boiler, such as rated evaporation, rated steam pressure, rated steam temperature, water supply temperature and fuel use. Evaporation refers to the amount of evaporation produced per hour. The rated evaporation of our company is generally between 1-20t /h. The price of gas-fired boilers is different when the output is different.

 

Gas steam boiler price

 

Gas fired steam boiler pressure is different, its required technology, material, stress is not the same. The higher the steam pressure, the more expensive it is. Steam temperature is a factor affecting the pressure, the general pressure is high, the temperature is high, so the technology, materials and other aspects of the requirements are more, so the price is expensive.

Gas fired boilers are generally gas, but also fuel, fuel application range is relatively wide, such as light oil, heavy oil, natural gas, city gas, gas and coke oven gas, users can choose according to the advantages of resources. Gas steam boiler price is reasonable, the use of economic and practical. So most people have chosen gas fired boiler as steam, heating, bath boiler equipment.

In the current environment of the boiler industry, in addition to the technology and quality of the boiler itself, which contains the most gold characteristics is environmental protection and energy saving. The main thing that gas-fired boiler needs to consider is the emission of nitrogen oxides, plus there are some other polluting gases in the derivative at present, the requirements of low emission are no longer limited to thermal power plants, but will penetrate into all kinds of daily applications, while the emission of Zozen Boilers products is completely in line with the specified standards.

 

Gas fired steam boilers manufacturer

 

Gas steam boiler price is reasonable, the price of the boiler is about how much money, but also depends on the boiler capacity. From the point of view of manufacturing material cost is relatively low, coupled with the quick assembly boiler covers an area of small space, the characteristics of sufficient output, the input of the boiler body is less. The above is about the high efficiency gas boiler quotation related introduction, because of the high efficiency gas boiler model, parameters and quotation content is more, if you want to understand the specific, welcome to contact us!

 

The post Gas Steam Boiler Price appeared first on Industry Boiler Manufacturer.

Gas steam boiler belongs to quick boiler series products. This kind of boiler is widely used in garment factory, hospital, school, textile factory, large supermarket, printing and dyeing factory, hotel, dining hall, food factory, beverage factory, bean product factory, meat product factory, cannery, winery, pharmaceutical factory, packaging factory, building materials factory, coating factory, swimming pool and other enterprises and institutions. Gas fired boiler size price is very reasonable, cost-effective products. The boiler has the advantages of generous appearance, compact structure, less space occupation, convenient transportation and less capital investment. It not only follows the concept of energy conservation and environmental protection, but also meets the thermal energy required by the project.

 

Gas fired boiler size

 

Gas Fired Steam Boiler Size FeatureBig furnace technique: Effectively increase the radiation heating area of the unit and reduce the NOX emission.Built-in stainless steel heat exchanger, high heat exchange efficiency and clean water quality.The smoke tube has built-in converging fins, which increases the heat exchange effect and makes the layout more compact.Inlet burner, high-efficiency combustion, extremely low noise and exhaust emissions, reaching the national first-class standard.The whole body adopts a square layout, and the whole body is sprayed, and the shape is compact and elegant.Spiral spoilers are installed in the flue pipe, which enhances heat transfer, improves boiler efficiency, and reduces operating costs.Direct heating: the body is under negative pressure, and the system is under pressure.Big furnace technique: Effectively increase the radiant heating area of the unit and reduce the NOX emission.

Gas steam boiler for garment factory is the mainstream product among boiler products at present, occupying an important market position. It is the most used product after coal-fired steam boiler. It has high thermal efficiency, low pollution, intelligent operation, safety and reliability, etc. Advantage is the first choice of current users. The boiler products have a continuous operating life of more than 10 years, and the thermal efficiency can reach more than 95%, which is higher than the specified standard. In addition, the burner of this boiler adopts international famous brand burners. The supporting key valves and instruments adopt domestic high-quality famous brand products and international famous brands, and customers can choose the configuration according to their own needs.

The combustion chamber of this series of gas fired boilers has a large volume, and is designed with the structure of corrugated furnace. It is equipped with double energy saving devices, with full and thorough fuel combustion, low fume exhaust temperature and high thermal efficiency. At the same time, the steam boiler is installed with the PLC control system independently developed by our factory. The touch screen is easy to set up and operate, and the staff is reduced. It is equipped with other monitoring and limiting devices to ensure the safe operation of the boiler without supervision.

 

Gas steam boilers price

 

Gas fired boiler size design is reasonable, according to the design of the controller control instruction system automatic combustion, stop. Its independent program controller has a number of environmental protection, stable performance and safe operation, low maintenance rate. The oil, gas and steam boiler will adjust the electric load according to the corresponding policy of the change of the temperature difference load, to ensure the balance of the development power and load, and to reduce the impact of the boiler on the power grid in operation. Zozen Boilers specialize in producing boiler products, we have established friendly and cooperative relationship with many users for many years, welcome to consult and purchase!

The post Garment Factories Gas Fired Steam Boiler Size appeared first on Industry Boiler Manufacturer.

Gas fired hot water boiler is safe to use, without explosion risk. Because, no matter any industry, safety is the top priority, must be safe, in order to protect all kinds of matters. The gas hot water boiler cost is different according to its tonnage, pressure and other parameters. This boiler is widely used in the field of heating and bath at ordinary times. It is precisely because of its convenience and safety that it has become a common boiler with high frequency of use.

 

Gas hot water boiler cost

 

This series of gas fired boilers use high-quality materials, advanced welding process and equipment, to create high-quality products. All welds are tested by X-ray inspection and hydraulic test. The machine is manufactured in strict accordance with the regulations to ensure that users have a reliable product. Equipped with low nitrogen burner, good quality, high efficiency and energy saving. Easy to install, easy to use, setting the upper and lower limits of water temperature, is the key to start and stop high temperature water temperature low temperature, automatic no mode.

This series of boiler products have anti-drying heating protection: when the equipment temperature is too high, automatic stop heating, and lack of alarm control system. Over-temperature protection: water temperature is automatically detected and controlled by the system. Overheat protection: the internal temperature of the equipment is automatically detected by the temperature sensor and controlled by the controller according to the set temperature. When the temperature exceeds the set data, the internal heating of the equipment will automatically stop. Gas hot water boiler cost and boiler tonnage, pressure, temperature and other parameters related. With a unique multi – channel, fire – tube heat exchanger, multiple design of the heating structure. To ensure the rapid rise of water into the equipment, to ensure the output of high-quality hot water. PLC intelligent control system, one-button operation, intelligent control, accurate temperature control, water level control, self-ignition, automatic operation.

Gas fired hot water boilers adopts low nitrogen burner, full combustion, low fuel consumption, flue gas emission in line with environmental protection standards. Adopt advanced blue flame technology, almost no incomplete combustion, full combustion, high flame burning intensity, fast speed, energy saving 30-40, dust-free, smokeless and pollution-free. This series boiler manufacture, steel automatic welding process, welding 100% X-ray non-destructive flaw detection machine. Horizontal structure, beautiful appearance, scientific and reasonable structure, easy to use, the machine factory without professional installation is convenient.

 

WNS series hot water boilers

 

The gas hot water boiler cost is reasonable, the product design is novel, the structure is reasonable and the process performance is good. WNS series hot water boilers manufactured by us are safe and reliable in use, with small footprint, energy saving and good environmental performance. At the same time, advanced energy-saving technology design, large water storage, sufficient heat, stable working temperature, long life. Our boilers are manufactured in strict accordance with the standard, and the emission of nitrogen oxides is lower than the prescribed standard. All boiler operation automatic monitoring, after-sales service is fully guaranteed.

The post Cost of New Gas Hot Water Boiler appeared first on Industry Boiler Manufacturer.